2024
​
● J. H. Yoo, S. J. Park, C. Bak, Y. M. Lee*, K. J. Kim*, "Addressing fundamental challenges of Si/Gr electrodes with high silicon contents using innovative bilayer electrode structure design" accepted for publication in Small Structures (2024)
● Y. J. Ha, S. Rho, B. K. Park, M. Kim, D. H. Jeong, H. Kim, I. Kim, Y. N. Jo, J. W. Choi*, K. J. Kim*, "Innovative Fast‐Charging Protocol Incorporating Proactive Lithium‐Plating Suppression Pulses for Lithium‐Ion Batteries: Protocol Design, Validation, and Post‐Mortem Analysis" DOI: 10.1002/aenm.202402032, Advanced Energy Materials (2024)
● Y. M. Kim, B. K. Park, S. Kang, S. Yang, S. H. Choi*, D.-J. Yoo*, K. J. Kim*, "Bespoke dual-layered interface enabled by cyclic ether in localized high-concentration electrolytes for lithium metal batteries" DOI
:10.1002/adfm.202408365, Advanced Functional Materials (2024)
● J. Park, J. S. Heo, S. J. Park, K. J. Kim*, T. Yim*, "Sb2O3-incorporated fluoride scavengeable Poly(imide)-based separator for lithium-ion batteries" Chemical Communications, Vol. 60, pp. 8447-8450 (2024)
● W. Kim, C. Hwang, Y. M. Kim, J. S. Yu, Y. J. Kim*, K. J. Kim*, H. S. Kim*, "Modulation of lithium iron phosphate electrode architecture by magnetic ordering for lithium-ion batteries" Journal of Materials Chemistry A, Vol. 12, pp. 14786-14791 (2024)
● Y. B. Shim, H. Lee, J. Moon* and K. J. Kim*, "Modification strategies improving the electrochemical and structural stability of high-Ni cathode materials" Journal of Energy Chemistry, Vol. 96, pp. 185-205 (2024)
● S. J. Park, Y. J. Choi, J. Cheon, H. Kim, J. W. Lee*, T. Yim*, K. J. Kim*, "A sacrificial separator facilitating in-situ creation of durable CEI layer and tailoring lithium dendrite for practical lithium metal batteries" Journal of Materials Chemistry A, Vol. 12, pp. 11551-1562 (2024)
● Y. M. Kim, J. I. Choi, B. K. Park, J. W. Han, J. W. Lee*, H. S. Kim*, K. J. Kim*, "Two-in-on strategy: discretely functionalized electrolyte additive for stable lithium metal batteries coupled with Ni-rich cathode" Chemical Engineering Journal, Vol. 486, 150354 (2024)
● J. Byun, W. Kim, H. Y. Jang, M. A. Lee, C. R. Lim, C. Hwang, J. H. Song, J. Yu, S. Back*, K. J. Kim*, H. S. Kim*, "Surface Work Function Modifier to Modulate Electrolyte Decomposition on Negative Electrode in Lithium-ion Batteries" DOI: 10.1002/adfm.2020401620, Advanced Functional Materials (2024)
● J. H. Yang, Y. K. Jeong, W. Kim, M. A. Lee, J. W. Choi*, H. S. Kim*, K. J. Kim*, "Dual Flame-retardant Mechanism-assisted Suppression of Thermal Runaway in Lithium Metal Batteries with Improved Electrochemical Performances" DOI: 10.1002/aenm.202304366, Advanced Energy Materials (2024) 
● S. J. Park, M. J. Hong, Y. J. Ha, J. I. Choi, K. J. Kim*, "Two-in-one strategy for optimizing chemical and structural properties of carbon felt electrodes for vanadium redox flow batteries" Science and Technology of Advanced Materials, Vol. 25, 2327274 (2024)
● S. J. Park, Y. J. Choi, H. S. Kim, M. J. Hong, H. Chang, J. Moon, Y. J. Kim*, K. J. Kim*, "Stable immobilization of lithium polysulfides using three-dimensional ordered mesoporous Mn2O3 as host material in lithium-sulfur batteries" Carbon Energy, Vol.6, e487 (2024)
●  S. Kim, H. R. Shin, K. J. Kim*, M. S. Park*, J. W. Lee*, "Driving inward growth of lithium metal in hollow microcapsule hosts by heteroatom-controlled nucleation" DOI: 10.1002/cey2.525, Carbon Energy (2024)
● T. Kim, K. H. Kim, H. Kim, W. Lee, W. Choi, J. Yoon, L. Song, K. J. Kim, R. N. Bulakhe*, W. S. Yoon*, J. M. Kim*, "New suggestion of highly durable electrode design for ordered mesoporous Ni-Mn binary transition metal oxide anode material in lithium-ion batteries", DOI: 10.1002/small.202406243, Small (2024)

2023

● Y. B. Shim, B. K. Park, K. J. Kim*. "Reasonable design of thick electrodes in lithium-ion batteries" Frontiers in Batteries and Electrochemistry, Vol. 2, pp. 1-15 (2023) (Invitation)
● W. Kim, T. H. Kim, J. Yu, Y. J. Kim*, K. J. Kim*, H. S. Kim*, "Interface-targeting individually functionalized ionic additive to construct stable interphase on selective electrode surface for practical lithium-ion pouch cells" Advanced Functional Materials, Vol. 33, pp. 2306068 (2023)
● J. W. Han, B. K. Park, V. C. Ho, J. Mun*, K. J. Kim*, "Enabling uniform Li deposition behavior with dynamic electrostatic shield by the single effect of potassium cation additives for dendrite-free lithium metal batteries" Materials Chemistry Frontiers, Vol. 7, pp. 4553-4563  (2023)
● Y. M. Kim, S. J. Park, L. T. Thao, J. H. Yoo, Y. B. Sim, H. Lee, J. Mun*, K. J. Kim*, "Functional separator decorated with polydopamine and halloysite nanotubes to boost Li+ transfer in lithium metal batteries" ChemNanoMat, Vol. 9, e202300050 (2023) (Invitation)
● J. Kim, S. Lee, S. Jeong, M. Hong, V. C. Ho, Y. D. Park, K. J. Kim*, J. Mun, "Booster Adhesion of Crystalline Poly(vinylidene fluoride) Binder by Heat Treatment for Ni-rich Layered Oxide Cathode in Lithium-ion Batteries" ChemNanoMat, Vol. 9, e202300049 (2023) (Invitation)
● Y. M. Kim, H. S. Kim, B. K. Park, J. H. Yang, H. J. Leem, J. Yu, S. Kim, S. Y. Kim, J. W. Lee*, M. S. Park*, K. J. Kim*, "Flattening of lithium plating in carbonate electrolyte enabled by all-in-one separator" Small, Vol. 19, 2301754 (2023)
● M. Baek, J. Kim, K. Jeong, S. Yang, H. Kim, J. Lee, M. Kim, K. J. Kim*, J. W. Choi*, "Naked metallic skin for homo-epitaxial deposition in lithium metal batteries" Nature Communications, Vol. 14, 1296 (2023)
● L. T. Thao, T. V. Nguyen, Y. Q. Nguyen, N. M. Phan, K. J. Kim*, N. N. Huy, N. T. Dung*, "Orange G degradation by heterogeneous peroxymonosulfate activation based on magnetic MnFe2O4/α-MnO2 hybrid" Journal of Environmental Sciences, Vol. 124, pp. 379-396 (2023)
● Y. J. Ha, Y. J. Choi, J. Choi, B. K. Park, J. H. Yang, K. J. Kim*, "Degradation mechanism of polyethylene separators in lithium-ion batteries after prolonged cycling" Korean Journal of Chemical Engineering, Vol. 40, pp. 519-523 (2023) (Invitation)
● K. J. Kim, H. J. Leem, J. Yu, H. S. Kim*, "Spontaneous lithiophilic and lithium-ion conductive functional  layer formation enabled by solution-casted zinc nitride for highly stable lithium metal electrode in carbonate electrolyte" International Journal of Energy Research, Vol. 2023, 9526791 (2023)
● B. K. Park, K. H. Kim, Y. G. Kwon, J. H. Yang, Y. M. Kim, D. W. Nam, K. J. Kim*, "Boehmite/PAN  nanocomposite fibrous separators with superior wettability and thermal properties for sodium-ion batteries with high electrochemical performances" Journal of Alloys and Compounds, Vol. 940,168864 (2023)
● B. K. Park, H. S. Kim, S. A. Han, H. J. Leem, Y. G. Kwon, J. H. Yang, J. Mun, J. Yu, M. S. Park*, J. H. Kim*,  K. J. Kim*, "Bi-morphological form of SiO2 on separator for modulating Li-ion solvation and self-scavenging of Li dendrites in Li metal batteries" ACS Applied Materials & Interface, Vol. 15, pp.6923-6932 (2023)
● S. J. Park, S. Y. Yang, S. A. Han, Y. J. Choi, T. Kim, M. S. Park*, J. H. Kim*, K. J. Kim*, "Two-in-one  separator capturing and reutilizing polysulfides for high performance lithium-sulfur batteries" Chemical Engineering Journal, Vol. 460, 141620 (2023) 

 
2022

● J. W. Han, B. K. Park, S. Y. Yang, J. Lee, J. Mun*, J. W. Choi*, K. J. Kim*, "Hierarchically porous  ferroelectric layer with the aligned dipole moment for a high-performance aqueous Zn metal battery" ACS Applied Materials & Interface, 14, 43, pp. 48750-48581 (2022)
● B. K. Park, H. Kim. K. S. Kim, H. S. Kim, S. H. Han, J. S. Yu, H. J. Hah, J. Moon, W. Cho*, K. J. Kim*,  "Interface design considering intrinsic properties of dielectric materials to minimize space-charge layer  effect between oxide cathode and sulfide solid electrolyte in all-solid-state batteries" Advanced Energy Materials, Vol. 12, 2201208 (2022)
● H. Kang, Y. M. Kim, B. K. Park, J. H. Yang, S. Jeong, K. J. Kim*, J. Mun*, "Effective dual-layer fabrication solution for the lateral axial failure of the electrode in lithium-ion batteries", International Journal of Energy Research, Vol. 46, pp. 23973-23983 (2022)
● S. E. Park, K. Shin, J. H. Yang, B. K. Park, S. Y. Kim, H. S. Kim, M. S. Park*, K. J .Kim*, "Track-etched  polyimide separator decorated with polyvinylpyrrolidone for self-assembling a robust protective layer on  lithium-metal anode" Chemical Engineering Journal, Vol. 445, pp. 136801 (2022)
● B. K. Park, Y. K. Ahn, Y. K. Kwon, K. J. Kim*, "Developing eco-friendly ceramic composite separator with  competitive electrochemical properties uisng water-based polymer binder for lithium-ion batteries"  International Journal of Energy Research, Vol. 46, pp. 1398-1406 (2022) 
● J. H. Yang, S. J. Hwang, S. K. Chun, K. J. Kim*, "Effect of Temperature on the Deterioration of Graphite-Based Negative Electrodes during the Prolonged Cycling of Li-ion Batteries" J. Electrochem. Sci. Technol. Vol. 13, pp. 208-212 (2022)
● Y. Kim, Y. Park, M. Kim, J. Lee, K. J. Kim*, J. W. Choi*, "Corrosion as the origin of limited lifetime of  vanadium oxide-based aqueous zinc ion batteries" Nature Communications Vol. 13. pp. 2371 (2022)


2021

● J. Lee, T. Lee, K. Char*, K. J. Kim*, J. W. Choi*, "Issues and Advances in Scaling up Sulfide-Based All-Solid-State Batteries" Accounts of Chemical Research, Vol. 54, pp. 3390-3402 (2021)
● H. S. Kim, J. H. Yang, J. W. Han, L. T. Thao, J. H. Ryu, S. M. Oh*, K. J. Kim* "Permeable characteristics of  surface film deposited on LiMn2O4 positive electrode revealed by redox-active indicator" Nano  Convergence, Vol. 8: 21 (2021)
​● B. K. Park, Y. K. Jeong, S. Y. Yang, S. Y. Kwon, J. H. Yang, Y. M. Kim, K. J. Kim*, "Deterioration behavior of   aluminum pouch films used as packaging materials for pouch-type lithium-ion batteries" Journal of Power  Sources, Vol. 506, pp. 230222 (2021)
● S. Y. Kwon, Y. Suharto, K. J. Kim*, "Facile preparation of an oxygen-functionalized carbon felt electrode to improve VO2+/VO2+ redox chemistry in vanadium redox flow batteries" Journal of Industrial and Engineering Chemistry, Vol. 98, pp. 231-236 (2021) 
● S. Kim, Y. Yoon, G. M. Narejo, M. Jung, K. J. Kim*, Y. J. Kim*, "Flexible graphite bipolar plate for vanadium  redox flow batteries" International Journal of Energy Research, Vol. 45, pp. 11098-11108 (2021)
● S. E. Park, S. Y. Yang, K. J. Kim*, "Boron-functionalized carbon felt electrode for enhancing the electrochemical performance of vanadium redox flow batteries" Applied Surface Science, Vol. 546, pp. 148941 (2021)
● J. Mun, T. Yim, Y. G. Kwon, K. J. Kim*, "Self-assembled nano-silica-embedded polyethylene separator with outstanding physicochemical and thermal properties for advanced sodium ion batteries" Chemical Engineering Journal, Vol. 405, pp. 125844 (2021) 
● S. E. Park, K. Lee, Y. Suharto, K. J. Kim*, "Enhanced electrocatalytic performance of nitrogen‐ and phosphorous‐functionalized carbon felt electrode for VO2+/VO2+ redox reaction" International Journal of Energy Research, Vol. 45, pp. 1806-1817 (2021)
● Y. J. Ahn, J. Moon, S. E. Park, J. S. Shin, J. W. Choi*, K. J. Kim*, "High-performance bifunctional electrocatalyst for iron-chromium redox flow batteries" Chemical Engineering Journal, Vol. 421, pp. 127855 (2021)
● J. N. Lee, E. Do, Y. Kim*, J. S. Yu, K. J. Kim*, "Development of titanium 3D mesh interlayer for enhancing the electrochemical performance of zinc-bromine flow battery" Scientific Reports 11, Article number: 4508 (2021)
● G. Lee, S. H. Oh, B. K. Park, Y. Kim*, K. J. Kim*, S. Manivannan, K. Kim, T. Yim*, "Trimesitylborane-embedded radical scavenging separator for lithium-ion batteries" Current Applied Physics, Vol. 31, pp. 1-6
● M. Jung, J. W. Han, S. E. Park, K. Lee, K. J. Kim*, "Development of Carbon-Polymer Composite Bipolar  Plates for Vanadium Redox Flow Battery" Polymer (Kor), Vol. 45, pp. 309-313 (2021)
● S. Y. Kim, Y. Y. Choi, K. J. Kim, J. I. Choi* "Forecasting state-of-health of lithium-ion batteries using variational long short-term memory with transfer learning" Journal of Energy Storage, Vol. 41, pp. 102893 (2021)
● H. Lim, H. Kim, S. O. Kim, K. J. Kim, W. C. Choi*, "Novel approach for controlling free-carbon domain in silicone oil-derived silicon oxycarbide (SiOC) as an anode material in secondary batteries" Chemical Engineering Journal, Vol. 404 (2021)


2020

● H. S. Kim, J. B. Lee,  K. J. Kim*, J. H. Ryu*, M. Oh*, "Aliphatic chain substitution for enhancing energy density of p-Benzoquinone Redox Couple for Non-Aqueous Flow Batteries" Journal of The Electrochemical Society, Vol. 167, 020551 (2020)
● Y. K. Ahn, Y. K. Kwon,  K. J. Kim*, " Surface‐modified polyethylene separator with hydrophilic property for enhancing the electrochemical performance of lithium‐ion battery", International Journal of Energy Research, Vol. 44, pp. 6651-6659 (2020)
● D. J. Yoo, S. Y. Yang, K. J. Kim*, J. W. Choi*, "Fluorinated Aromatic Diluent for High‐Performance Lithium Metal Batteries" Angewandte Chemie International Edition, Vol. 59, pp. 14869-14876 (2020) 
● B. Chang, J. Kim, Y. Cho, I. Hwang, M. S. Jung, K. Char, K. T. Lee, K. J. Kim*, J. W. Choi*, "Highly Elastic Binder for Improved Cyclability of Nickel‐Rich Layered Cathode Materials in Lithium‐Ion Batteries" Advanced Energy Materials, Vol. 10, pp. 2001069 (2020)
● J. Jang, H. Kim, H. Lim, K. J. Kim, H. G. Jung, S. O. Kim, W. C. Choi*, "Surfactant-based selective assembly approach for Si-embedded silicon oxycarbide composite materials in lithium-ion batteries" Chemical Engineering Journal, Vol. 401(2020) 
● D. Kim, H. Kim, H. Lim, K. J. Kim, H. G. Jung, D. Byun, C. Kim, W. C. Choi*, "A facile control in free‐carbon domain with divinylbenzene for the high‐rate‐performing Sb/SiOC composite anode material in sodium‐ion batteries" International Journal of Energy Research, Vol. 44, pp. 11473-11486 (2020)


2019

● Y. Suharto, K. Lee, K. J. Kim*, "The improved electrochemical performance of vanadium redox flow battery by decorating functionalized mesoporous carbon catalyst with three-dimensional interconnected network", J. Ind. Eng. Chem., Vol. 70, pp. 290-298 (2019)
● K. J. Kim, Y. K. Kwon, T. Yim, W. C. Choi*, "Functional separator with lower resistance toward lithium ion transport for enhancing the electrochemical performance of lithium ion batteries" J. Ind. Eng. Chem., Vol. 71, pp. 228-233 (2019)
● Y. D. Yoo, A. Elabd, S. Choi, Y. Cho, J. Kim, S. J. Lee, S. H. Choi, T. Kwon, K. Char, K. J. Kim*, A. Coskun*, J. W. Choi*, "Highly Elastic Polyrotaxane Binders for Mechanically Stable Lithium Hosts in Lithium-Metal Batteries" Advanced Materials, Vol. 31, pp. 1901645 (1 of 10)  (2019)
● H. Kim, H. Lim, H. S. Kim, K. J. Kim, D. Byun, W. Choi, "Polydopamine-derived N-doped carbon-wrapped Na3V2(PO4)3 cathode with superior rate capability and cycling stability for sodium-ion batteries" Nano Research, Vol. 12, pp. 397-404  (2019)
● Y. K. Ahn, Y. H. Jo, W. S. Cho, J. S. Yu, K. J. Kim*, "Mechanism of Capacity Fading in the LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium-Ion Batteries" Energies, Vol. 12, pp. 1638 (1 of 10) (2019)


2018

● Y. Suharto, Y. Lee, J. S. Yu, W. C. Choi, K. J. Kim*, "Microporous ceramic coated separators with superior wettability for enhancing the electrochemical performance of sodium-ion batteries", J. Power Sources, vol. 376, pp. 184-190 (2018)
● C. Y. Jeong, K. J. Kim*, "Analysis of moisture penetration mechanism into the Al-pouch type lithium ion batteries", Polymer(Korea), vol. 42, pp. 1035-1039 (2018)
● H. S. Kim, S. Hwang, Y. Kim, J. H. Ryu, S. M. Oh*, K. J. Kim*, "Bi-functional effects of lengthening aliphatic chain of phthalimide-based negative redox couple and its non-aqueous flow battery performance at stack cell", APL Materials, vol. 6, pp. 047901-1-7 (2018)
● D. J. Yoo, K. J. Kim*, J. W. Choi*, "The Synergistic Effect of Cation and Anion of an Ionic Liquid Additive for Lithium Metal Anodes", Advanced Energy Materials, 1702744, pp. 1-8 (2018)
● K. Lee, J. H. Choi, H. M. Lee, K. J. Kim*, J. W. Choi*, "Solution-Processed Metal Coating to Nonwoven Fabrics for Wearable Rechargeable Batteries", Small, 1703028, pp. 1-8 (2018)
● Y. G. Kim, Y. Y. Choi, N. Yun, N. Y. Yang, Y. Jeon, K. J. Kim*, J. I. Choi*, "Activity gradient carbon felt electrodes for vanadium redox flow batteries", J. Power Sources, vol. 408, pp. 128-135 (2018)
● W. Cho, J. H. Song, K. W. Lee, M. W. Lee, H. Kim, J. S. Yu, Y. J. Kim*, K. J. Kim*, "Improved particle hardness of Ti-doped LiNi1/3Co1/3Mn1/3-xTixO2 as high-voltage cathode material for lithium-ion batteries" J. Physics and Chemistry of Solids, vol. 123, pp. 271-278 (2018)
● D. J. Yoo, S. Yang, Y. S. Yun, J. H. Choi, D. Yoo, K. J. Kim*, J. W. Choi*, "Tuning the Electron Density of Aromatic Solvent for Stable Solid‐Electrolyte‐Interphase Layer in Carbonate‐Based Lithium Metal
   Batteries" Advanced Energy Materials, DOI:10.1002/aenm.201802365 (2018)
● Y. Lee, H. Lim, S. O. Kim, H. S. Kim, K. J. Kim, K. Y. Lee, W. C. Choi, "Thermal stability of Sn anode material with non-aqueous electrolytes in sodium-ion batteries" J. Mater. Chem. A, vol. 6, pp. 20383-20392 (2018)
● Y. Kwon, Y. Lee, S. O. Kim, H. S. Kim, K. J. Kim, D. Byun, W. C. Choi, "Conducting Polymer Coating on a High-Voltage Cathode Based on Soft Chemistry Approach toward Improving Battery Performance" ACS Applied Materials & Interfaces, vol. 10, pp. 29457-29466 (2018)


2017

● J. K. Lee, M. S. Park, K. J. Kim*, “Highly enhanced electrochemical activity of Ni foam electrodes decorated with nitrogen-doped carbon nanotubes for non-aqueous redox flow batteries” J. Power Sources, vol. 341, pp. 212-218 (2017)
● D. J. Yoo, J. S. Kim, J. Shin, K. J. Kim, J. W. Choi,“Stable Performance of Aluminum-Metal Battery by Incorporating Lithium-Ion Chemistry” ChemElectroChem, vol. 4, pp. 2345-2351 (2017)
● K. B. Lee, J. K. Lee, K. W. Kwon, M. S. Park, J. H. Hong, K. J. Kim*, “3D graphene-Ni foam as an advanced electrode for high-performance non-aqueous redox flow batteries” ACS Applied Materials & Interfaces, vol. 9, pp. 22502-22508 (2017)
● K. J. Kim, "Development of Polyvinyl Alcohol (PVA) Non-woven Separator Coated with ZrO2 Ceramic Nanoparticles for Improving Electrochemical Performance and Thermal Property of Lithium Ion Batteries" JKECS, vol. 2, pp. 49-54 (2017)
● Y. H. Lee, S. O. Kim, J. Mun, M. S. Park, K. J. Kim, K. Y. Lee, W. C. Choi, "Influence of salt, solvents, and additives on the thermal stability of delithiated cathodes in lithium-ion batteries" Journal of Electroanalytical Chemistry, vol. 807, pp. 174-180 (2017)


2016

● T. Yim, S. H. Han, N. H. Park, M. -S. Park, J. H. Lee, J. Shin, J. W. Choi*, Y. Jung, Y. N. Jo, J. -S. Yu, K. J. Kim*, “Effective Polysulfide Rejection by Dipole-aligned BaTiO3 Coated Separator in Lithium-Sulfur  Batteries” Adv. Funct. Mater. vol. 26 pp. 7817-7823 (2016)
● S. J. Choi, T. Yim*, W. Cho, J. Mun, Y. N. Jo, K. J. Kim*, G. Jeong, T.-H. Kim, Y.-J. Kim*, “Rosin-Embedded Poly(acrylic acid) Binder for Silicon/Graphite Negative Electrode” ACS Sustainable Chemistry & Engineering, vol. 4, pp. 6362-6370 (2016)
● K. J. Kim, H. S. Lee, J. H. Kim, M. S. Park, J. H. Kim, Y. J. Kim, M. Skyllas-Kazacos, “Superior Electrocatalytic Activity of a Robust Carbon-Felt Electrode with Oxygen-Rich Phosphate Groups for All-Vanadium Redox Flow Batteries” ChemSusChem, vol. 9, pp. 1329-1338 (2016)
● K. J. Kim, C. Y. Jeong, “Effect of Microstructure on High Temperature Mechanical Properties of A319 Casting Alloy for Automotive Cylinder Heads” Mater. Transsactions, vol. 57, pp. 738-747 (2016)
● Y. K. Kim, W. Y. Lee, K. J. Kim*, J. S. Yu, Y. J. Kim, “Shutdown-functionalized nonwoven separator with improved thermal and electrochemical properties for lithium-ion batteries” J. Power Sources, vol. 305, pp. 225-232 (2016)
● T. Yim, K. S. Kang, J. Mun, S. H. Lim, S. G. Woo, K. J. Kim, M. S. Park, W. S. Cho, J. H. Song, Y. K. Han, J. S. Yu, Y. J. Kim, “Understanding the effects of a multi-functionalized additive on the cathode–electrolyte interfacial stability of Ni-rich materials”, J. Power Sources, vol. 302, pp. 431-438 (2016)


2015

● G. Jeong, H. Kim, H. S. Lee, Y. K. Han, J. H. Park, J. H. Jeon, J. Song, K. Lee, T. Yim, K. J. Kim, H. Lee, Y. J. Kim, H. J. Sohn, “A room-temperature sodium rechargeable battery using an SO2-based nonflammable inorganic liquid catholyte” Scientific Reports  5 (2015)
● M. S. Park, J. Kim, K. J. Kim, J. W. Lee, J. H. Kim, Y. Yamauchi, “Porous nanoarchitectures of spinel-type transition metal oxides for electrochemical energy storage systems” PCCP, vol. 46, pp. 30963-30977
● K. J. Kim, Y. J. Kim, “바나듐 레독스 플로우 이차전지 (VRFB)용 PAN계 카본 펠트 전극 기술 개발 동향 및 전망”, E-chem Magazine, vol. 6, pp. 16-27 (2015) ISSN 2093-5072
● Y. G. Lim, M. S. Park, K. J. Kim*, K. S. Jung, J. H. Kim, M. Shahabuddin, D. J. Byun, J. S. Yu, “Incorporation of conductive polymer into soft carbon electrodes for lithium ion capacitors”, J. Power Sources, vol. 299, pp. 49-56 (2015)
● T. Yim, M. S. Park, S. G. Woo, H. K. Kwon, J. K. Yoo, Y. S. Jung, K. J. Kim*, J. S. Yu, Y. J. Kim, “Self-extinguishing lithium ion batteries based on internally embedded fire-extinguishing microcapsules with temperature-reponsiveness”, Nano Letters, vol. 15, pp. 5059-5067 (2015)
● J. G. Nam, S. M. Hwang, M. S. Park, K. J. Kim, J. G. Kim, S. X. Dou, J. H. Kim, J. W. Lee, “One-dimensional manganese-cobalt oxide nanofibres as bi-functional cathode catalysts for rechargeable metal-air batteries” Scientific Reports 5 (2015)
● E. J. Park, M. S. Park, J. W. Lee, K. J. Kim, G. Jung, J. H. Kim, Y. J. Kim, H. S. Kim, “A Highly Resilient Mesoporous SiOx Lithium Storage Material Engineered by Oil–Water Templating’, ChemSusChem, vol. 8, pp. 688-694 (2015)
● K. J. Kim, M. S. Park, Y. J. Kim, J. H. Kim, S. X. Dou, M. Skyllas-Kazacos, “A technology review of electrodes and reaction mechanisms in vanadium redox flow batteries”, J. Materials Chemistry A, vol. 3, pp. 16913-16933 (2015)
● S. M. Hwang, S. Y. Kim, J. G. Kim, K. J. Kim, J. W. Lee, M. S. Park, Y. J. Kim, M. Shahabuddin, Y. Yamauchi, J. H. Kim, “Electrospun manganese–cobalt oxide hollow nanofibres synthesized via combustion reactions and their lithium storage performance”, Nanoscale, vol. 7, pp. 8351-8355 (2015)
● S. G. Woo, H. J. Han, K. J. Kim, J. H. Kim, J. S. Yu, Y. J. Kim, “Surface modification by sulfated zirconia on high-capacity nickel-based cathode materials for Li-ion batteries”, Electrochimica Acta, vol. 153, pp. 115-121 (2015) 


2014

● K. J. Kim, S. W. Lee, T. Yim, J. G. Kim, J. W. Choi, J. H. Kim, M. S. Park, Y. J. Kim, “A new strategy for integrating abundant oxygen functional group into carbon felt electrode for vanadium redox flow batteries”, Scientific Reports 4: 6906 (2014)
● M. S. Park, N. J. Lee, S. W. Lee, K. J. Kim*, D. J. Oh, Y. J. Kim, “High-energy redox flow batteries with hybrid metal foam electrodes”, ACS Applied Materials & Interfaces, vol. 6, pp. 10729-10735 (2014)
● K. J. Kim, H. J. Kim, C. Y. Jeong, “Mechanical and die soldering properties of Al-Si-Mg-Mn cast alloy”, Materials Research Innovations, vol. 18, pp. S2-66-S2-672 (2014)
● K. J. Kim, M. S. Park, T. Yin, J. S. Yu, Y. J. Kim, “Electron-beam-irradiated polyethylene membrane with improved electrochemical and thermal properties for lithium-ion batteries”, J. Appl. Electrochem., vol. 44, 345-352 (2014)
● K. J. Kim, H. K. Kwon, M. S. Park, T. Yim, J. S. Yu, Y. J. Kim, “Ceramic composite separators coated with moisturized ZrO2 nanoparticles for improving the electrochemical performance and thermal stability of lithium ion batteries” PCCP, vol. 16. pp. 9337-9343 (2014)
● M. S. Park, E. J. Park, J. W. Lee, G. Jeong, K. J. Kim, J. H. Kim, Y. J. Kim, H. S. Kim, “Hydrogen silsequioxane-derived Si/SiOx nanospheres for high-capacity lithium storage materials”, ACS Applied Materials and Interfaces, vol. 6, pp. 9608-9613 (2014)
● T. Yim, S. J. Choi, Y. N. Jo, T. H. Kim, K. J. Kim, G. Jeong, Y. J. Kim, “Effect of binder properties on electrochemical performance for silicon-graphite anode: Method and application of binder screening”, Electrochimica Acta, vol. 136, pp. 112-120 (2014)
● T. Yim, S. H. Kim, S. G. Woo, K. J. Lee, J. H. Song, W. S. Woo, K. J. Kim, J. S. Kim, Y. J. Kim, “1,3-propansultone as an effective functional additive to enhance the electrochemical performance of over-lithiated layered oxides”, RSC Advances, vol. 4, pp. 19172-19176 (2014)
● J. H. Kim, H. K. Kang, S. G. Woo, G. Jeong, M. S. Park, K. J. Kim, J. S. Yu, T. Yim, Y. N. Jo, H. S. Kim, K. Zhu, Y. J. Kim, “Oriented TiO2 nanotubes as a lithium metal storage medium”, J. Electroanalytical Chemistry, vol. 726, pp. 51-54 (2014)
● J. G. Kim, M. S. Park, S. M. Hwang, Y. J. Heo, T. Lao, Z. Sun, J. H. Park, K. J. Kim, G. Jeong, Y. J. Kim, J. H Kim, S. X. Dou, “Zr4+ doping in Li4Ti5O12 anode for lithium ion batteries: Open Li+ diffusion paths through structural imperfection”, ChemSusChem, vol. 7, pp. 1451-1457 (2014)
● M. S. Park, B. O. Jeong, T. J. Kim, S. Kim, K. J. Kim, J. S. Yu, Y. J. Jung, Y. J. Kim, “Disordered mesoporous carbon as polysulfide reservoir for improved cyclic performance of lithium-sulfur batteries”, Carbon, vol. 68, 265-272 (2014)
● K. S. Jeon, R. Nirmala, R. Navamathavan, K. J. Kim, S. H. Chae, T. W. Kim, H. Y. Kim, S. J. Park, “The study of efficiency of Al2O3 drop coated electrospun meta-aramid nanofibers as separating membrane in lithium-ion secondary batteries”, Materials Letters, vol. 132. pp. 384-388 (2014)
● J. S. Park, P. Kusumah, Y. J. Kim, K. J. Kim, K. J. Kwon, C. K. Lee, “Corrosion prevention of chromium nitride coating with an application to bipolar plate materials”, Electrochemistry, vol. 82, pp. 658-662 (2014)
● J. S. Park, B. Dilasari, Y. J. Kim, K. J. Kim, C. K. Lee, K. J. Kwon, “Passivation behavior and surface resistance of electrodeposited nickel-carbon composites”, Electrochemistry, vol. 82, pp. 561-565 (2014)
● J. S. Park, B. Dilasari, Y. J. Kim, K. J. Kim, C. K. Lee, K. J. Kwon, “Corrosion investigation of nitrided chromium coating layer on nickel in non-aqueous electrolyte” Materials Chemistry and Physics, vol. 148, pp. 444-448 (2014)
● T. Yim, K. S. Kang, J. S. Yu, K. J. Kim, M. S. Park, S. G. Woo, G. J. Jeong, Y. N. Jo, K. Y. Im, J. H. Kim, Y. J. Kim, “Effect of acid scavengers on electrochemical performance of lithium-sulfur batteris: Functional additives for utilization of LiPF6”, Japanese J. Applied Physics, vol 53, pp. 08NK01 (2014)
● J. Y. Koh, T. J. Kim, M. S. Park, E. H. Kim, S. Kim, K. J. Kim, J. S. Yu, Y. J. Kim, Y. J. Jung, “Mesoporous Carbon Additives for Long Cycle Life Sulfur Cathodes of Li-S Batteries”, Bull. Korean Chem. Soc., vol. 35, pp. 3331 (2014)
●J. Y. Koh, M. S. Park, E. H. Kim, T. J. Kim, S. Kim, K. J. Kim, Y. J. Kim, Y. J. Jung, “Electrochemical Reduction Mechanism of Sulfur Particles Electrically Isolated from Carbon Cathodes of Lithium-Sulfur Cells”, J. Electrochemical Society, vol. 161, pp. A2117-A2120 (2014)


2013

● T. Y. Yim, H. J. Ha, M. S. Park, K. J. Kim*, J. S. Yu, Y. J. Kim, “A facile method for construction of functionalized multi-layered separator to enhance cycle performance of lithium manganese oxide”, RSC advances, vol. 3, 255657-255661 (2013)
● M. S. Park, J. S. Yu, K. J. Kim, G. J. Jeong, J. H. Kim, T. E. Yim, Y. N. Jo, U. Hwang, S. Kang, T. W. Woo, H. S. Kim, Y. J. Kim, “Porous carbon sphere as a functional conducting framework for use in lithium-sulfur batteries”, RSC Advances, vol. 3, pp. 11774-11781 (2013)
● M. S. Park, J. S. Yu, K. J. Kim, G. J. Jeong, J. H. Kim, Y. N. Jo, U. Hwang, S. K. T. W. Woo, Y. J. Kim, “One-step synthesis of a sulfur-impregnated graphene cathode for lithium-sulfur batteries”, Phys. Chem. Chem. Phys., vol. 14, pp. 6796-6804 (2013)
● T. E. Yim, M. S. Park, J. S. Yu, K. J. Kim, K. Y. Im, J. H. Kim, G. J. Jeong, Y. N. Jo, S. G. Woo, K. S. Kang, I. G. Lee, Y. J. Kim, “Effect of chemical reactivity of polysulfide toward carbonate-based electrolyte on the electrochemical performance of Li-S batteries”, Elecrochimica Acta, vol. 107, pp. 454-460 (2013)
● M. S. Park, J. W. Lee, J. W. Lee, K. J. Kim, Y. N. Jo, S. G. Woo, Y. J. Kim, “Tuning the surface chemistry of natural graphite anode by H3PO4 treatments for improving electrochemical and thermal properties”,Carbon, vol. 62, pp. 278-287 (2013)
● M. S. Park, J. H. Kim, K. J. Kim, G. J. Jeong, Y. J. Kim, “Morphological modification of α-MnO2 catalyst for use in Li/Air batteries”, J. Nanoscience and Nanotechnology, vol. 13, pp. 3611-3616 (2013)
● J. H. Kim, S. C. Woo, M. S. Park, K. J. Kim, T. Yim, J. S. Kim, Y. J. Kim, “Capacity fading mechanism of LiFePO4-based lithium secondary batteries for stationary energy storage”, J. Power Sources, vol. 229, pp. 190-197 (2013)
● C. Y. Jeong, K. J. Kim*, H. U. Hong, S. W. Nam, “Effects of aging temperature and grain size on the formation of serrated grain boundaries in an AISI 316 stainless steel”, Materials Chemistry and Physics, vol. 139, pp. 27-33 (2013)


2012년 이전

● K. J. Kim, M. S. Park, J. H. Kim, U. Hwang, N. J. Lee, G. Jeong, Y. J. Kim, “Novel catalytic effects of Mn3O4 for all vanadium redox flow batteries”, ChemComm, vol. 48, pp. 5455-5457 (2012)
● K. J. Kim, M. S. Park. H. Kim, Y. J. Kim, “Thermal stability enhancement of polyethylene separators by gamma-ray irradiation for lithium ion batteries”, Japaness J. Applied Physics, vol. 51, pp. 09MB03-1–09MB03-4 (2012)
● M. S. Park, J. S. Yoo. K. J. Kim, G. Jeong, J. H. Kim, Y. N. Jo, U. Hwang, S. Kang, T. Woo, Y. J. Kim, “One-step synthesis of a sulfur-impregnated graphene cathode for lithium-sulfur batteries”, Phys. Chem. Chem. Phys., vol. 14, pp. 6796-6804 (2012)
● N. J. Lee, S. W. Lee, K. J. Kim*, J. H. Kim, M. S. Park, G. Jeong, Y. J. Kim, D. Byun, “Development of carbon composite bipolar plates for vanadium redox flow batteries”, Bull. Korean Chem. Soc., vol. 33, pp. 3589-3592 (2012)
● J. R. Lee, J. H. Won, J. H. Kim, K. J. Kim, S. Y. Lee, “Evaporation-induced self-assembled silica colloidal particle-assisted nanoporous structural evolution of poly(ethylene terephthalate) nonwoven composite separators for high-safety/high-rate lithium-ion batteries”, J. Power Sources, vol. 216, pp. 42-47 (2012)
● K. J. Kim, J. H. Kim, M. S. Park, H. K. Kwon, H. S. Kim, Y. J. Kim, "Enhancement of electrochemical and thermal properties of polyethylene separators coated with polyvinylidene fluoride-hexafluoropropylene co-polymer for Li ion batteries", J. Power Sources, vol. 198, pp. 298-302 (2012)
● K. J. Kim, H. U. Hong and S. W. Nam, "A study on the mechanism of serrated grain boundary formation in an austenitic stainless steel", Materials Chemistry and Physics, vol. 126, pp. 480-483 (2011)
● K. J. Kim, Y. J. Kim, J. H. Kim, M. S. Park, "The effects of surface modification on carbon felt electrodes for use in vanadium redox flow batteries", Materials Chemistry and Physics, vol. 131, pp. 547-553 (2011)
● J. H. Kim, K. J. Kim*, M. S. Park, N. J. Lee, U. Hwang, H. S. Kim, Y. J. Kim, "Development of metal-based electrodes for non-aqeous redox flow batteries", Electrochemistry Communications, vol. 13, pp. 997-1000 (2011)
● J. S. Park, G. J. Jeong, Y. J. Kim, K. J. Kim, C. K. Lee, "A study on corrosion resistance and electrical surface conductivity of an electrodeposited Ni-W thin film", J. Kor. Inst. Surf. Eng., vol. 44, pp. 68-73 (2011)
● G. J. Jeong, Y. J. Kim, K. J. Kim, J. H. Kim, C. K. Lee, "Development trends in redox flow battery for power storage", Trends in Metals & Materials Engineering, vol 24, pp. 54-60 (2011)
● K. J. Kim, Y. H. Kim, J. H. Song, Y. N. Jo, J. S. Kim and Y. J. Kim, "Effect of gamma ray irradiation on thermal and electrochemical properties of polyethylene separator for Li ion batteries", J. Power Sources, vol. 195, pp. 6075-6080 (2010)
● J. H. Song, H. J. Park, K. J. Kim, Y. N. Jo, J. S. Kim, Y. U. Jeong and Y. J. Kim, "Electrochemical characteristics of lithium vanadate. Li1+xVO2, new anode materials for lithium ion batteries", J. Power Sources, vol. 195, pp. 6157-6161 (2010)
● Y. N. Jo, Y. R. Kim, J. S. Kim, J. H. Song, K. J. Kim, C. Y. Kwan, D. J. Lee, C. W. Park and Y. J. Kim, "Si-graphite composite as anode materials for lithium secondary batteries", J. Power Sources, vol. 195, pp. 6031-6036 (2010)
● K. J. Kim, H. U. Hong and S. W. Nam, "Investigation on the formation of serrated grain boundaries with grain boundary characteristics in an AISI 316 SS", J. Nuclear Materials, vol. 393, pp. 249-253 (2009)
● K. J. Kim, H. U. Hong, K. S. Min and S. W. Nam, "Correlation between the carbide morphology and cavity nucleation in an austenitic stainless steels under creep-fatigue", Mater. Sci. Eng. A, vol 387-389, pp. 531-535 (2005)
● K. J. Kim, J. Ginsztler and S. W. Namm " The role of carbon on the occurrence of grain boundary serration in an AISI 316 stainless steel during aging heat treatment", Materials Letters, vol. 59, pp. 1439-1443 (2005),
● K. J. Kim, H. U. Hong, K. S. Min and S. W. Nam, "Effects of modification of the carbide characteristics through grain boundaryserration on creep-fatigue life in austenitic stainless steels", Acta Metallurgica Sinca (English Letters), vol. 5, pp. 632 638 (2004)
● K. J. Kim and S. W. Nam, "A study on the Improvement of High Temperature LCF Properties by Aging Treatment in Nb-A286 superalloy", J. Kor. Inst. Met. Mater., vol. 41, no. 1, pp. 13-20 (2003)
● B. S. Rho, K. J. Kim and S. W. Nam, "The Effect of Hold Time and Waveform on the High-Temperature, Low-Cycle Fatigue Properties of a Nb-A286 Alloy", Met. and Mat. Trans. A. vol. 32A, pp. 2539-2546 (2001)
● K. S. Min, K. J. Kim and S. W. Nam. "Investigation of the Effect of the Types and Densities of Grain Boundary Carbides on Grain Boundary Cavitation Resistance of AISI 321 Stainless Steel under Creep-Fatigue Interaction", J. Alloying and Compound, vol. 370, pp. 223-229 (2003)